Step 1: get a real weight
We read 35 BRKOX wall frame and case listings on 30 October 2026. They gave sizes, materials and prices, but none gave a weight. [9] Examples: the Concorde 10318 frame is 45.3 x 19.7 in. [6] The N-1 Starfighter 75442 case is 19.7 in wide, 5.9 in deep and 31.5 in high, built from 5mm acrylic, and priced at $289.90 (or $339.90 for the LED Display Edition). [7]
So the weight is something you measure. Weigh the empty frame or case on a bathroom or luggage scale. Add the built set (weigh it on its base, or weigh its box contents before building) and any battery box or USB power bank that will hang with it. Double the total for the anchor calculation below if you want headroom for a knock or a child pulling on it. That doubling is our suggestion, not a published figure.
Depth matters as well as weight. TOGGLER's bulletin says an anchor's holding strength falls as the distance of the load from the wall increases. [1] A 5.9 in deep case such as the N-1 holds its weight further from the wall than a flat frame with a printed backboard does. [7]
Step 2: know your wall and what one anchor maker publishes
TOGGLER publishes full test figures for its SNAPTOGGLE heavy-duty toggle bolts. They are ultimate values: the load at which the test failed. The bulletin says "industry standards recommend 1/4 of ultimate test load". It also says the figures are guides only and cannot be guaranteed, and that the age and condition of the wall must be considered. [1] The working figures in the table below are a quarter of TOGGLER's published numbers.
TOGGLER's product page sums the anchor up as supporting "up to 238 lbs. in 1/2" drywall and 802 lbs. in concrete". [2] Those are the BA size's ultimate figures, not working loads. Both BA and BB sizes need a 1/2 in drill hole, at least 1-7/8 in of clearance behind the wall, and a wall 3/8 in to 3-5/8 in thick. The screw must be at least the wall thickness plus the thickness of the item plus 1/2 in. [1]
TOGGLER's table covers drywall, drywall over 25-gauge steel studs, concrete block and steel plate. It does not cover wood studs. For a screw driven into a wood stud, use the screw maker's published figures instead.
| Wall (TOGGLER SNAPTOGGLE) | BA ultimate pull-out | BA working (1/4) | BB ultimate pull-out | BB working (1/4) |
|---|---|---|---|---|
| 1/2 in drywall | 238 lb | about 60 lb | 265 lb | about 66 lb |
| 5/8 in drywall | 356 lb | 89 lb | 356 lb | 89 lb |
| 1/2 in drywall on 25-gauge steel stud | 412 lb | 103 lb | 425 lb | about 106 lb |
| Concrete block | 802 lb | about 200 lb | 1,080 lb | 270 lb |
| 1/2 in drywall, shear (load along the wall) | 247 lb | about 62 lb | 241 lb | about 60 lb |
Step 3: check what the frame or case ships with
BRKOX describes its hanging hardware listing by listing. Its McLaren MCL39 F1 42228 frame (31.5 x 19.7 in, $99.70, or $145.90 with LEDs) says "Ready to mount – screws, wall plugs and installation hardware included". [3] The Concorde 10318 frame lists a "Concealed wall-mount system" with mounting hardware included. Its optional USB-powered LEDs come without a plug or power bank. [6] The Game Boy 72046 frame (11 x 2.4 x 9.1 in, $49.90) has a built-in stand plus "wall-mounting holes", so it can sit on a desk or hang. [8] None of these listings says what wall type the included plugs are for, or what load they carry.
IKEA puts the same point plainly. Its KALLAX page says "the max load for a wall-hung frame depends on the wall material". It tells buyers to use screws and plugs suited to their home, and to get professional advice if unsure. [4] The BILLY page says the brackets come in the box, but the wall screws or fixings are sold separately because they depend on your wall. [5] For your own LEGO frame, treat bundled plugs the same way. Use them if they match your wall, and replace them with rated anchors if they do not.
| What the listing says (BRKOX, 30 Oct 2026) | Example | What you still need to check |
|---|---|---|
| Screws, wall plugs and hardware included | McLaren MCL39 F1 42228 frame [3] | Plug type versus your wall; total weight |
| Concealed wall-mount system; hardware included | Concorde 10318 frame [6] | Hook spacing; plug type; USB plug or power bank for the LED version |
| Wall-mounting holes plus a built-in stand | Game Boy 72046 frame [8] | Screw head size for the holes; anchors |
| Wall-mounted acrylic case with size and acrylic thickness only | N-1 Starfighter 75442 case [7] | Weight with the set; depth from the wall; fixings |
Step 4: a worked example
Say a 45.3 x 19.7 in frame with its set and a power bank weighs 4 kg (about 8.8 lb) on your scale. That is an example figure, not a published one. Doubled for headroom, that is about 17.6 lb. On 1/2 in drywall, two SNAPTOGGLE BA anchors give about 120 lb of working pull-out between them at the quarter-of-ultimate standard, and about 124 lb in shear. [1] That is a wide margin.
The same frame on two small plastic plugs with no published load figure is a guess, which is why Step 3 matters. On concrete block, TOGGLER's published figures are several times higher than on drywall. [1] Still pick an anchor its maker rates for block.
Pre-drilling checklist
Work through this in order. Stop at any step you cannot answer.
- Weigh the frame or case, the set and any battery box or power bank together. Write it down.
- Find out the wall type: drywall (and its thickness), drywall on steel studs, wood studs, plaster or masonry. Check the thickness at an outlet cover or switch plate if you can do so safely.
- Check for pipes and cables where you plan to drill, using a detector or the building plans.
- Pick an anchor whose maker publishes load figures for your wall type. Divide its ultimate figure by four if the maker gives ultimate values. [1]
- Confirm the anchor's drill size, clearance behind the wall and grip range. For SNAPTOGGLE BA and BB: a 1/2 in hole, 1-7/8 in clearance, and a wall 3/8 in to 3-5/8 in thick. [1]
- Check that the frame's hooks or holes take the anchor's bolt or screw head.
- Plan the light kit lead. Mark where the USB lead or battery box will go, and keep it out of the drilling path.
- Mark level positions, drill, fit the anchors, then hang the empty frame first and load the set afterwards.
Questions before you decide
How much weight can a drywall anchor hold for a LEGO frame?
It depends on the anchor and the wall. TOGGLER publishes 238 lb ultimate pull-out for its SNAPTOGGLE BA in 1/2 in drywall. It cites an industry standard of using a quarter of the ultimate figure, which is about 60 lb per anchor.
Are the screws and plugs that come with a display frame good enough?
They may be. BRKOX lists screws, wall plugs and hardware for frames such as the McLaren 42228, but does not say which wall type they suit or what they hold. IKEA says the load a wall-hung item can take depends on the wall material, so match the fixings to your wall.
Do LEGO display frame listings give a weight?
Not the 35 BRKOX frame and case listings we read on 30 October 2026. They gave sizes, such as 45.3 x 19.7 in for the Concorde frame, but no weight. Weigh the frame, the set and any battery box yourself.
Does a deeper case need stronger anchors?
It puts more strain on the same anchors. TOGGLER says holding strength varies inversely with the distance of the load from the wall, so a 5.9 in deep case loads its anchors harder than a flat frame of the same weight.
Sources & verification
Product details and prices can change. Check the linked provider before buying.
- TOGGLER SNAPTOGGLE heavy-duty toggle bolts technical bulletin (PDF) Accessed 30 Oct 2026
- TOGGLER SNAPTOGGLE heavy-duty toggle bolt (carbon steel) product page Accessed 30 Oct 2026
- BRKOX wall display frame for LEGO McLaren MCL39 F1 Car 42228 Accessed 30 Oct 2026
- IKEA US: KALLAX shelf unit (wall-hung load and anchoring notes) Accessed 30 Oct 2026
- IKEA US: BILLY bookcase (wall anchoring hardware note) Accessed 30 Oct 2026
- BRKOX wall display frame for LEGO Concorde 10318 (with optional LED) Accessed 30 Oct 2026
- BRKOX wall display case for LEGO N-1 Starfighter 75442 Accessed 30 Oct 2026
- BRKOX wall display frame for LEGO Game Boy 72046 Accessed 30 Oct 2026
- BRKOX store catalogue feed (frame and case listings scanned) Accessed 30 Oct 2026
Sources link directly to providers. Product buttons may use separately labeled affiliate links. Read our disclosure.